Well G96 Bolt




G96 Synthetic CLP Gun Oil, Synthetic Bio-CLP Gun Oil, and Rifle Bore Cleaner has been APPROVED for use by the U.S. Army for 21st Century CLEANING, LUBRICATING, and PRESERVATION of both Small and Large Caliber Weapons and Weapons Systems. Military Specification MIL-PRF-63460F (Type A traditional and Type B bio-based) and MIL-PRF-372F (Type A traditional – non-bio-based)

I got it for 250 bucks off of airsplat. It's shooting around 540 FPS. Range is about 150 feet accurately, but if you ajust the hop-up right you can probably. I recently received a Bravo Company AR15 bolt to keep as a long term spare. It arrived in a small heat sealed plastic bag. I saw no liquid oil so emailed them to see if I needed to open the bag to apply oil to prevent rust (which would ruin the sealed bag). They responded that the part is sprayed with G96 Gun Treatment before packaging. The MB4411G has a L96 style fluted metal outer barrel. A polymer hand guard with a quad rail system allows you to mount any needed tactical accessories such as a bi-pod or laser. The polymer body is rigid and feature a front & rear metal sling points. The magazine well features a paddle style magazine release for rapid magazine swaps. WellFire G96 Bolt Action AWP Airsoft Sniper Rifle w/ Folding Stock. The NEW Wellfire CUSTOM G96 AWP Sniper Rifle is the best priced collapsible-stock Sniper Rifle on the market. Shooting at 450-500 FPS right out of the box,this Sniper Rifle has everything you need to dominate on the field as a sniper.

These specifications assure that our Synthetic CLP Gun Oil (traditional and Bio-based) and Rifle Bore Cleaner meets or exceeds the newest Military Standards. We welcome all Government Agencies, Law Enforcement Officials, Security Organizations, Hunters, and Sportsmen/Sportswomen to experience our products. Just take a look at the findings….

G96 Synthetic CLP Gun Oil and Rifle Bore Cleaner has met the following specifications as tested by the U.S. Military/Armament Research, Development and Engineering Center (ARDEC). Please read the MIL-PRF-63460F and MIL-PRF-372F specification for a complete listing of the approval criteria. You may click on FAQ’s to view additional information on the testing process as well as additional information on all of our other products.

G96

The U.S. Military/ARDEC findings included:

“Your candidate CLP, G96, not only recorded excellent performance in both the cold temperature test and the salt-spray test with no Class I stoppages in either, but your best two weapons averaged only 4 stoppages in the dust test against in the criteria of no more than 5, so we are pleased to qualify your current formulation.”

A sample of the criteria used to evaluate our CLP:

  • Severe Cold Weather
  • Sandy and Dusty Environments
  • Salt Spray Corrosion Protection
  • High Humidity
  • Firing Residue Removal
  • Corrosion Protection from Propellant Reaction Products
  • and most importantly – LIVE FIRE tests conducted by ARDEC on M249’s after cold temperature, exposure to blowing dust, and after salt-spray conditioning.

Click HERE to view the CLP Qualification Testing Update Letter.

“Because of the severe nature of the test and corrosive damage to non-lubricated surfaces, only one weapon was dedicated to each lubricant. All weapons showed significant rust on the outside of the barrels, and some steel parts, but the weapon protected by your product had little or no evidence of corrosion in the receiver area, on the bolt or on the rails or spring assembly. Your product successfully passed this test with no stoppages in the 200 rounds fired.”


PATERSON, N.J., Oct. 17, 2016 — G96 Products Inc., a leading supplier of gun lubricants and cleaning products, announces it has received U.S. Army certification for its new Bio-CLP Synthetic Gun Oil, opening the door for its use by America’s soldiers. Bio-CLP is the first bio-based gun oil from a … Continue reading


PATERSON, N.J. — G96 Products Inc., a leading supplier of gun lubricants and cleaning products, has introduced a new grease for rapid-fire weapons where smooth, glitch free operation can mean the difference between life and death. The new RFG (Rapid Fire Gun) Grease uses nano-synthetics to increase lubricity, even in … Continue reading


Are there other governmental approvals for G96 Products?

G96 was approved by the Canadian Police Research Centre for use by the Royal Canadian Mounted Police (RCMP) for use in cold weather in November of 1995.

You may view the results of Report TR-01-97: Evaluation of Gun Lubricant Operation at Low Temperatures by clicking here.

What are some other uses for Synthetic CLP Gun Oil?

Synthetic CLP Gun Oil may be used in many other ares such as crossbows, fishing reels, locks, marine applications, bearings, etc.

Passed: Live fire tests conducted by the U.S. Army (ARDEC) on M249’s

Please note that these tests were performed by ARDEC andnot an Independent Laboratory. ARDEC is the only agency that can certify and perform a live fire test for the MIL-PRF-63460E specification.

Test Criteria

Test weapons: The test weapon shall be the machine gun, 5.56 MM: M249. New weapons (guns that have been fired less than 5000 rounds) or guns with a used receiver with an all new operating group shall be used.

Firing residue removal: CLP shall provide cleaning capability to remove a minimum average of 80 % of the residue generated from the ignition of WC 844 propellant.

Weapon performance: CLP shall provide cleaning, lubricating and preservative characteristics to support operating requirements of the machine gun: 5.56MM, M249, when exposed to the following conditions

Weapons Firing Salt-Spray Test

Well g96

Operating Requirements – Salt Spray: Salt-spray environments. CLP applied to an M249 that is then exposed to a salt-spray environment for 96 hours shall prevent any Class II or III stoppages, shall allow not more than two Class I stoppages in 200 rounds, and shall sustain a rate of fire of at least 650 rpm.

Salt-spray environment test: Only one machine gun shall be used for salt-spray testing and its’ performance alone shall determine if the requirement is met.

Inspection and preparation: The test weapons shall be disassembled, cleaned and lubricated with a normal application (see TABLE VI, Note 2) of the candidate product. With the bolt closed and the safety set in the “safe” position, the machine gun shall be placed in a salt spray cabinet and exposed to 5 % salt-spray in accordance with the Salt Fog Test Procedure of TOP 3-2-045, except that salt-spray and dry cycles shall be 48 hours each instead of 24 hours.

Weapons Firing: After the last salt-fog/dry cycle is complete, the weapon shall be moved to the firing position and loaded with an un-conditioned 100-round belt of ammunition. An initial burst of approximately 10 rounds shall be fired to validate the firing rate. The remainder of the 100-round belt shall be fired in 5-7 round bursts to check for stoppages. The second un-conditioned 100-round belt of ammunition shall be fired in the same manner, without further conditioning of the weapon.

Salt-spray environment failure criteria: Any Class II or III stoppage, more than two Class I stoppages in 200 rounds, or a reduction in the rate of fire below 650 rpm, shall be cause for rejection of the lubricant.

Weapons Firing Dust Test:

Operating Requirements – Dust Test: Dust environments. CLP applied to an M249 that is then exposed to very fine blowing dust for 50 minutes shall prevent any Class II or III stoppages, shall allow not more than five Class I stoppages in 500 rounds, and shall sustain a rate of fire of at least 650 rpm.

Dust Test: Three M249s shall be used for each candidate lubricant for dust testing and the average performance of the two weapons with the least number of stoppages shall be used to determine if the requirement is met. This test shall be conducted in accordance with provisions for static test procedure for dust exposure of TOP 3-2-045, except as noted.

G96

Inspection and preparation: The test weapons shall be disassembled, cleaned and lubricated with a generous application (see TABLE VI, Note 4) of the candidate product. The weapons (with bolts and ejector ports closed, and barrel dust caps installed, or muzzles taped) shall be exposed to blowing dust. Dusting shall be as specified in TOP 3-2-045, except that the dusting cycle time shall be 10 minutes.

Weapons Firing: After the dusting cycle, the weapon shall be moved to the firing position, loaded with an un-conditioned 100-round belt and fired. An initial burst of approximately 10 rounds shall be fired to validate the firing rate. The remainder of the 100-round belt shall be fired in 5 to 7-round bursts to check for stoppages. This conditioning and firing sequence shall be repeated four times for a total of 500 rounds fired from each weapon.

Dust test failure criteria: Any Class II or III stoppage, more than five Class I stoppages in 500 rounds, or a reduction in the rate of fire below 650 rpm, shall be cause for rejection of the lubricant.

Weapons Firing Cold Temperature Tests:

Operating Requirements – Cold temperature: CLP applied to an M249 that is then exposed to severe cold for 18 hours shall prevent any Class II or III stoppages, shall allow not more than two Class I stoppages in 200 rounds, and shall sustain a rate of fire of at least 650 rounds per minute (rpm).

Cold Temperature Test: Three M249s shall be used for each candidate lubricant for cold temperature testing and the average performance of the three shall be used to determine if the requirement is met.

Inspection and preparation: The test weapons shall be disassembled, cleaned and lubricated with a light application (see TABLE VI, Note 3) of the candidate lubricant. With the bolt closed and the safety set in the “safe” position, the machine gun shall be conditioned at -51 ± 2 °C (-60 ± 4 °F) for 16 ± 1 hours.

Weapons Firing: Weapons firing shall be conducted within the cold temperature chamber immediately after the conditioning cycle is complete. The weapon shall be loaded with an un-conditioned (ambient temperature) 100-round belt of ammunition, and an initial burst of approximately 10-rounds shall be fired to validate the firing rate. The remainder of the belt shall be fired in 5 to 7-round bursts to check for stoppages. Repeat the cycle, except condition the weapon for only 2 hours ± 15 minutes at the same temperature. Fire the second, un-conditioned 100-round belt in the same manner employed in the first cold temperature firing cycle.

Cold temperature failure criteria: Any Class II or III weapon stoppage, more than two Class I stoppages in 200 rounds, or a reduction in the rate of fire below 650 rpm, shall be cause for rejection of the lubricant.

Ammunition used during testing:

Belts of ammunition shall be loaded as “combat mix”, (4 ball (M855) and 1 tracer (M856)). The ammunition required for each of the three tests shall remain outside the individual environmental chambers, and shall not be conditioned.

Definitions of stoppages:

  • Class I weapon stoppage: A failure that is immediately clearable (within 10 seconds or less) by the operator following prescribed immediate action procedures.
  • Class II weapon stoppage: A failure that is clearable by the operator (requiring more than 10 seconds but not more than 10 minutes) using only the equipment and tools issued with the weapon.
  • Class III weapon stoppage: A failure of a severe nature. The failure; (1) is operator correctable but requires more than 10 minutes, (2) operator cannot correct and requires assistance( no time limit), (3) requires higher level of maintenance, or authorized operator correction cannot be accomplished because of unavailability of necessary tools, equipment or parts.
TABLE VI. Weapons firing test summary.
Firing testApplicationTest ConditionRoundsFailure criteria (Note 1)
InspectionNormal (note 2)Ambient temp200<700-850 rds/min
Cold temp (2 Cycles)Light (note 3)-51 ± 2 °C
(-60 ± 4 °F)
200<650 rds/min, or >2 Class I stops/200 rds
Dust (5 Cycles)Generous (note 4)After dusting
Ambient temp
500<650 rds/min, or >5 Class I stops/500 rds
Salt-sprayNormalAfter exposure
Ambient temp
200<650 rds/min, or >2 Class I stops/200 rds
  • Note 1: Any Class II or III weapon stoppage during any test is cause for failure of the test.
  • Note 2: Normal application – as described in the operator’s manual TM 9-1005-201-10.
  • Note 3: Light application – apply a thin film of lube barely visible to the eye.
  • Note 4: Generous application – apply lube heavy enough so that it can be spread with a finger.

Where is the qualified product database?

The Qualified Product Database (QPD) can be found by accessing the ASSIST Database.

To locate CLP in the ASSIST Database:

  • Access the ASSIST Database, which will open in a new window.
  • Click on Quick Search.
  • Under Document ID type in “63460.”
  • Click on QPL-63460-32.
  • Under Revision History click on “View QPD data”.
  • Under Gov’t Designation, click on “CLP” to view the G96 Products Company listing.

What is the qualified product listing for G96 Synthetic CLP Gun Oil?

The Qualified Product Listing is QPL-63460, which may also be known as QPD-63460.

What is the intended use for CLP?

Intended use: CLP covered by this specification is a highly penetrating, mobile liquid and is intended for field application to satisfy the complete need of cleaning, lubricating, and short term preservation of military weapons. CLP facilitates the effective removal of firing residues, gums and other contaminants from weapon components while providing lubrication and short term preservation for reliable weapons operation. Short term preservation is defined as Preservation period of time not to exceed 30 days.

Please note that although MIL-PRF-63460E states that CLP is approved for short term preservation, G96’s Synthetic CLP Gun Oil is rated for use longer than 30 days. Although it is difficult to say how long due to variable environmental possibilities, we recommend that not only the firearm be stored in a locked and safe position, but that it be stored in a cool area with low humidity.

Well

Ventilation requirements: Due to the solvent systems often employed in CLP type formulations, field users should avoid using CLP in conditions of limited ventilation, that is, closed rooms, sealed vehicles, etc.

Please note that although MIL-PRF-63460E states the above ventilation requirements, G96’s Synthetic CLP Gun oil contains no solvents. Therefore, normal ambient ventilation is satisfactory.

Preservative application limitation: Caution should be exercised when using CLP where ventilation of the treated surface, prior to sealing, is not practicable. CLP should not be used for preservation for long-term storage without consulting the qualifying activity.

Please note that although MIL-PRF-63460E states that CLP is approved for short term preservation, G96’s Synthetic CLP Gun Oil is rated for use longer than 30 days. Although it is difficult to say how long due to unlimited storage possibilities, we recommend that not only the firearm be stored in a locked and safe position, but that it be stored in an area where it is cool and low humidity.

Are there other military specifications for CLP?

CLP (MIL-PRF-63460E) may be used in lieu of MIL-PRF-372 (RBC), MIL-PRF-3150 (PL-M), MIL-PRF-14107 (LAW) and MIL-L-46000 (LSA) where authorized by the appropriate weapons manual or lubrication order.

What are the military performance specifications for lubricant, cleaner, and preservative for weapons and weapons systems?

The new specification is known as MIL-PRF-63460F or NATO S-758. The weapons lubricant is commonly known as CLP. Type “A” is for “traditional” CLP and Type “B” is for “bio-based” CLP

Please be advised that existing NSNs are the same for the MIL-PRF-63460D specification and the MIL-PRF-63460F specification.

Please note that lubricants that qualified under 63460D or earlier are no longer valid and do not meet the criteria of the new 63460F specification. To prevent using lubricants that are no longer approved, Military organizations should be especially cautious and take note when purchasing.

What are the National / NATO Stock Numbers for G96 Synthetic CLP Gun Oil?

Please note that the NSNs listed are classified as “Small and Large Caliber Weapons and Weapons Systems Lubricant.” They are not “General Purpose Lubricants.”

Type “A” traditional CLP

  • NSN: 9150-01-102-1473 , G96 stock #: 1070 – 0.5 oz. cylindrical plastic bottle in natural
  • NSN: 9150-01-079-6124, G96 stock #: 1053M– 4 fl. oz. flat oval plastic bottle in natural
  • NSN: 9150-01-054-6453, G96 stock #: 1071– 1-pt. cylindrical plastic bottle w/sprayer in white
  • NSN: 9150-01-327-9631, G96 stock #: 1072– 1 liter cylindrical plastic bottle w/sprayer in white
  • NSN: 9150-01-053-6688, G96 stock #: 1053G– 1-gallon jug plastic bottle in natural

Type “B” Bio-based CLP

  • NSN: 9150-01-663-4635 , G96 stock #: 2070 – 0.5 oz. cylindrical plastic bottle in natural
  • NSN: 9150-01-663-3879 G96 stock #: 2053M – 4 fl. oz. flat oval plastic bottle in natural
  • NSN: 9150-01-663-4643, G96 stock #: 2071 – 1-pt. cylindrical plastic bottle w/sprayer in white
  • NSN: 9150-01-663-4623, G96 stock #: 2072 – 1 liter cylindrical plastic bottle w/sprayer in white
  • NSN: 9150-01-663-4610, G96 stock #: 2053G – 1-gallon jug plastic bottle in natural

Synthetic CLP Gun Oil is also currently available in 55 gallon drums. Please contact us for special pricing.

Please be advised that existing NSNs are the same for the MIL-PRF-63460D specification and the MIL-PRF-63460F specification.

Please note that lubricants that qualified under 63460D or earlier are no longer valid and do not meet the criteria of the new 63460F specification. To prevent using lubricants that are no longer approved, military organizations should be especially cautious and take note when purchasing.

Does G96 still manufacture hunting knives?

No. G96 knives are no longer available and have not been available for many years. The knives were produced by a separate division of “G96 Brand” that is no longer in existence. The third party manufacturer is also no longer in business. We do not support, warranty, repair or replace any knives that are still in circulation.

What is G96 Fabric Waterproofing?

G96 Fabric Waterproofing is a scientific compound that chemically unites with fabrics and leather to produce an effective long lasting waterproofing. Will last through repeated washings. Lets fabrics breathe; will not clog pores; is completely invisible, will not stain clothing and leaves no odor. Not sticky, greasy, or gummy.

What is G96 Leather & Boot Waterproofing?

G96 Leather & Boot Waterproofing is a new scientific formula that makes leather waterproof without impairing its breathing characteristics. Maintains leather flexibility at low temperatures and extends life in presence of salt and alkalis. Good for use on old and new leather. Not sticky – leaves leather smooth to the touch.

What is RUSTBUSTER® Detergent Action Penetrating Oil?

RUSTBUSTER® Quickly Changes Rust and Dirt from a Solid to a Liquid.

Hundreds of Industrial Uses:

  • Frees Rusted Nuts, Bolts, Studs, LocksFrees Sticky Valves, Frozen Battery Terminals, Jammed and Locked Mechanisms.
  • Frees Corroded Bolts on mufflers and tailpipes.
  • Lubricates automotive shocks, manifolds, heat control vales, and throttle linkages.
  • Removes grime, grease, and carbon from engine heads.
  • Cleans and lubricates lawn mowers, door hinges, locks, window cracks, bicycles, sewing machines, outboard marine motors, farm machinery, and earth moving equipment.

Used by Airlines, Truck and Bus Fleets, Plumbers, Garage men, Industrial Maintenance Men, etc

What are some other uses for Gun Treatment?

You can use Gun Treatment with a U.S. Nickel (5 cent coin) to help remove rust spots from barrels.

Gun Treatment can also be used on crossbows, fishing reels, locks, marine applications, helps free rusted bearings and bushings and lubricate simultaneously.

Where should I use Crud Buster or Gun Degreaser?

Crud Buster is used to help remove dirt particles from difficult to reach areas without disassembling the firearm. Crud Buster is a powerful aerosol spray that helps “blast away” dirt and crud. Gun Degreaser is used to clean and degrease metal especially before bluing. Gun Degreaser is a liquid that comes in a bottle. Gun Treatment or Synthetic CLP Gun Oil should be applied after Crud Buster or Gun Degreaser.

What is the difference between Nitro Solvent and Copper Solvent?

Well G96 Bolt Action

Nitro solvent is used for skeet and trap shooters to help remove corrosive acid residue from plastic shot shells.

Copper solvent is used to remove copper or gilded metal fouling and powder residue in all firearm bores. Maybe harmful around painted metal, plastic, synthetic stocks or varnished stocks. Ammonia based.

It is recommended that the firearm be re-treated with Gun Treatment or Synthetic CLP Gun Oil after use.

What is the difference between Bore Solvent and Bore Solvent Gel?

They are the same product except the Gel version is gelatinous. It is used primarily inside of long barrels where one would want the solvent to adhere to the inside of the barrel around the entire circumference evenly without dripping down the inside walls of the barrel prematurely.

It is recommended that the firearm be re-treated with Gun Treatment or Synthetic CLP Gun Oil after use.

What is the difference between G96 Gun Treatment (aerosol) and G96 Gun Oil (liquid)?

They are the same product except one is an aerosol (spray) and the other is a liquid in a bottle with a twist cap. Both are petroleum based.

What is the difference between G96 Gun Treatment or Gun Oil and G96 Synthetic CLP Gun Oil?

Synthetic CLP Gun Oil has been approved by the US Military (MIL-PRF-63460E) whereas Gun Treatment is not an approved product for the US Military.

Gun Treatment and Gun Oil are petroleum based. The Synthetic CLP gun oil is synthetic based. The Synthetic CLP Gun Oil is 85% biodegradable and contains no VOC’s.

Well G96 Boneyard

Synthetic CLP Gun Oil only comes in a liquid form whereas G96 Gun Treatment is available in either a liquid bottle or an aerosol spray can.

Synthetic CLP Gun Oil has slightly better cold weather specifications. Synthetic CLP gun oil is rated at -74F and Gun Treatment is rated at -50F.

Synthetic CLP Gun Oil has slightly better corrosion protection and slightly better clean up after firing.

Synthetic CLP Gun Oil has Corrosion Protection from Propellant Reaction Products

Well G96 Bolt

Both have excellent properties for Preservation protection for long and short term.

Neither product will evaporate.

Neither product will thicken or congeal.

What is G96 Gun Treatment?

G96 “Triple Action” Gun Treatment is the finest most complete firearms product made. It Cleans, Lubricates, and Protects your gun in one operation. No solvent or preservation necessary.

Cleans Your Gun: Contains solvents which will completely remove all traces of rust, gun powder, leading, and corrosion in seconds.

Well G96 Bolt Grip

Lubricates Your Gun: Contains lubricants which will not freeze, oxidize, or evaporate (the result of missile research). Leaves no gummy residue. Keeps firing pin and all moving parts working as low as -50F below zero; insures perfect firing every time.

Protects Your Gun: Leaves invisible magnetic film over all metal parts which protects your gun against rust under all weather conditions, even salt water spray. Protects frequently handled guns against “fingerprint” damage.

Where can I purchase G96 Products?

Well G96 Bolt Torque

G96 Products can be purchased from several national retailers, many online retailers, and many smaller local gun shops and armorers. You can find them by simply doing a search using keywords such as: G96, G96 Gun Treatment, G96 Synthetic Gun Oil, G96 Gun Blue, etc. If you have difficulty obtaining our products, please do not hesitate to contact us. Our products are available domestically and internationally. On our LINKS page you will find a listing of domestic and international wholesale distributors. You may also contact them for assistance in finding a local retailer.